Table 1-1 Keys For Entering Data - NEC Univerge SV8100 Programming Manual

Issue 1.0
U
S 5
SING
ECTION
Once you enter the programming mode, use the keys in the following chart to enter
data, edit data and move around in the menus.
Use this key...
1 - 4
K M
EYS TO OVE
When you want to...
0~9 and Enter data into a program.
Complete the programming step you just made (e.g., pressing Enter
Transfer
on a PC keyboard). When a program entry displays, press Transfer
to bypass the entry without changing it.
Delete the entry to the left (e.g., pressing Backspace on a PC
Recall
keyboard).
Hold Delete or clear all characters to the right of the cursor.
Answer Exit one step at a time from the program window currently being
viewed.
For example, if programming item 5 in 15-03, pressing Answer
allows you to enter a new option in program 15-03. Pressing Answer
again allows you to select a new program in the 15-XX series.
Pressing Answer a third time allows you to enter a new program
beginning with 1. Pressing Answer one last time brings you to the
beginning program display, allowing you to enter any program
number.
MIC Switch between the different input data fields by pressing
cursor moves up to the top row of the display. Pressing
moves the cursor back to the middle row.
LINE KEYS Use pre-programmed settings to help with the program entry. These
settings vary between programs from LINE 1 = 0 (off) and LINE 2 = 1
(on) to preset values for timers where LINE 1 = 5, LINE 2 = 10, LINE
3 = 15, etc.
For programs with this option, the line key, which currently matches
the programmed setting, lights steady.
The display can also indicate Softkey, which will allow you to select
the values as well (-1 and +1 will step through these pre-programmed
settings.)
LINE KEY 1 Program a pause into a Speed Dialing bin.
Program a recall/flash into a Speed Dialing bin.
LINE KEY 2
LINE KEY 3 Program an @ into a Speed Dialing bin.
A
ROUND IN THE

Table 1-1 Keys for Entering Data

Keys for Entering Data
UNIVERGE SV8100
P
ROGRAMS
MIC
. The
MIC
again
Introduction