NEC Univerge SV8100 Programming Manual page 198

Issue 1.0
Item
No.
20
21
22
23
2 - 158
Item
Baud Rate for CTA Port
Select the baud rate to be used by
the CTA Adapter.
Virtual Extension Access Mode
(when idle Virtual Extension key
pressed)
Determine whether a Virtual
Extension/Call Arrival Key(CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1)
is selected, the key functions as a
virtual extension and can be used
for incoming and outgoing calls.
When Ignore (2) is selected, the
key functions as a CAR key and
can receive incoming calls only.
Multiple Incoming From
Intercom and Trunk
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights solid
when a trunk call rings in. If 22-
01-01 is set to 0 for intercom
priority, the Hotline key does not
light for incoming trunk calls, but
lights solid for intercom calls.
If 15-02-22 is disabled, Hotline
keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
Speed Dial Preview Mode
This option defines how a speed
dial key functions when pressed. If
set to Preview (0), the speed dial
number can be previewed before
dialing. If set to Outgoing
Immediate (1), the number is dialed
immediately.
Input Data
0 = 4800
1 = 9600
2 = 19200
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Disable
1 = Enable
0 = Preview
1 = Outgoing Immediately
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Related
Default
Program
2 15-02-19
2
1 22-01-01
0