In-Dhcp Server Setup - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the
CD-CP00-US blade.
Input Data
Item
No.
01
02
05
Feature Cross Reference
Programming Manual
Item
DHCP Server 0
Mode
1
Lease Time Days 0~255
Hour 0~23
Minutes 1~59
Last DHCP Data 0
1
Conditions
None
Voice Over Internet Protocol (VoIP)

10-13 : In-DHCP Server Setup

Input Data Default
= Disable
= Enable
0 day
0 hour
30 minutes
= Disable
= Enable
Description
0 Enable or disable the use of the
built-in DHCP Server.
Lease Time of the IP address to a
client.
Pressing the Transfer Key
increments to the next setting
data.
1 If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.
Issue 1.0
2 - 25