Isdn Options - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
Use Program 20-25 : ISDN Options to define the ISDN system options.
Input Data
Item
No.
2 - 244
Program 20 : System Option Setup
01 Send the Release Message After Subscriber Hangs
Up
02
Progress Indicate Information Element Detect
03
Bearer Capability Select from SLT Outgoing
04 Send DT until user dials first digit (Local Dial Tone)
With Overlap Sending Mode, if the network side stops
dial tone when CLI is included in the SETUP message,
the system sends dial tone until the user dials the first
digit instead of the network.
05 T305 Timer Start After Sending Disconnect
Message
06
Call Proceeding Send Mode
07 Local Busy Tone Mode Set When Disconnect
Message Received
08 Use of Lower Layer Compatibility (LLC)
This Program must be set to (0 = Disable) for
International Dialing when using Calling Number
Presentation (CPN) from station.
09 High Layer Compatibility (HLC) Sending
10
S-Point Terminal Seizes Analog Trunk
Item
UNIVERGE SV8100

20-25 : ISDN Options

Input Data
0 = Service Off
1 = Service On
0 = Service Off
1 = Service On
0 = 3.1KHz Audio
1 = Speech
0 = Service Off
1 = Service On
0 = Service Off
1 = Service On
0 = Service Off
1 = Service On
0 = Local Busy Tone
Off
1 = Busy Tone from
NT (network side)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
Program 20 : System Option Setup
Default
1
1
0
0
1
1
0
0
0
1