NEC Univerge SV8100 Programming Manual page 544

Issue 1.0
Input Data
Item
No.
05
06
07
2 - 504
Item
Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all parties
on a call hear the voice prompt "Recording",
followed by a single beep when the extension user
initiates Conversation Record. If disabled, the voice
prompt and beep do not occur. When you disable
the Conversation Record beep, the following voice
prompts do not occur while VM8000 InMail records
the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity is
reached)
You have reached the recording limit
(if the recorded message is too long)
The UNIVERGE SV8100 telephone system
software provides an additional Conversation
Record beep. This beep repeats according to the
setting of Program 45-01-06: Voice Mail Integration
Options: Record Alert Tone Interval Time (0~64800
seconds). To disable the UNIVERGE SV8100
telephone system Conversation Record beep,
enter 0 for this option.
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting light at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest
Mailboxes, you should leave this option disabled.
Auto Attendant Direct to VoiceMail
Use this option to enable or disable Auto Attendant
Direct to VM. When a subscriber enables Auto
Attendant Direct to VM, an Automated Attendant
caller routes directly to the mailbox, hears the
greeting, and is asked to leave a message. A
subscriber can also enable Auto Attendant Direct to
VM while recording their mailbox greeting.
UNIVERGE SV8100
Input Data
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
Program 47 : InMail
Default
1
1
0