NEC Univerge SV8100 Programming Manual page 571

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Programming Manual
To have Unscreened Transfer call a specific extension, the corresponding
Number option should be that extension number. The caller then dials that
single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter
UTRF for the Action and 303 for the corresponding Number.
REC1 Action – Quick Message With Greeting (3) (REC1)
Use this action to allow an Automated Attendant caller to leave a Quick
Message at an extension. With this action, the caller hears the extension
greeting prior to leaving the message.
Number Options
To have the caller leave a quick Message at a specific extension, the
corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension, the
corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a
specific range, the corresponding Number option should be XXX.
For example, to allow callers to leave a Quick Message extensions
301~399, for key 3 enter REC1 for the Action and XXX for the
corresponding Number.
REC2 Action – Quick Message Without Greeting (4) (REC2)
Use this action to allow an Automated Attendant caller to leave a Quick
Message at an extension. With this action, the caller does not hear the
extension greeting prior to leaving the message. Instead, the caller hears the
voice prompt Recording followed by a beep.
Number Option
To have the caller leave a quick Message at a specific extension, the
corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension, the
corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a
specific range, the corresponding Number option should be XXX.
For example, to allow callers to leave a Quick Message extensions
301~399, for key 3 enter REC2 for the Action and XXX for the
corresponding Number.
Issue 1.0
2 - 531

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents