Dial Analysis Extension Table - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis
Extension Table to set the dial extension analysis table. These tables are used when
the analyzed digits must be more than eight digits. If the received digits do not match
the digits set in tables 1~250, table number 252 is used to refer to the next Extension
Table Area (1~4) to be searched. If the received digits are not identified in tables
1~250, the F-Route selection table number defined in table 251 is used.
Input Data
Dial Analysis Table Number : 1~250
Item
No.
01
02
2 - 468
Program 44 : ARS/F-Route Setup

44-03 : Dial Analysis Extension Table

Extension Table Area Number
Dial Analysis Table Number
Item
Dial
ARS/F-Route Select
Table Number
Input Data
Up to 24 digits
#
Digits = 1~9, 0, , , @
(Press Line Key 1 for wild character @)
0~500 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is
checked.
With Program 44-01 set to 1, Program 44-04 is
checked.
Program 44 : ARS/F-Route Setup
UNIVERGE SV8100
1~4
1~252
Default
No Setting
0