NEC Univerge SV8100 Programming Manual page 747

UNIVERGE SV8100
Alarm
Type Report
No.
6 0 0 Blocking
7 1 0 Power failure
8 1 0 RAM Backup
Battery Error
9 --- Reserved ---
10 0 0 ISDN Link
Error
11 0 0 CTI Link Error
12 0 0 ACD MIS Link
Error
Programming Manual
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
The link of terminals
connected with the ESI
package came off.
The supply of the
commercial power
stopped.
RAM backup battery on the
CD-CP00-US blade is
unplugged or defective.
Layer1 link of ISDN lines
came off.
The link with the CTI server
came off.
The link with ACD MIS
client PC came off.
Cause Action
• Breakdown of Confirm the terminal
terminal. connected with same
• Faulty wiring and ESI. If they work
wiring normally, confirm the
determination. breakdown or the wiring
• External noise. for the terminal.
• Breakdown of ESI Exchange the terminal
package. that doesn't work and
the working terminal,
and confirm it's
working. An external
factor of the noise etc.
is thought.
Please reconfirm wiring
and the installation,etc.
Please inquire of the
manufacturer when the
problem occurs after it
confirms it.
• The power cable Confirm the power
came off. supply outlet when the
• Power failure commercial power has
• The power supply not stopped.
unit broke down. Please inquire of the
manufacturer when the
problem occurs.
Check the battery
connector. If it is
connected correctly,
replace the battery.
• Connected Confirm the data of
determination of PRG10-03.
main device and Reconfirm wiring and
ISDN line the installation of DSU.
• Breakdown of Please inquire of the
DSU manufacturer when the
• The setting of problem occurs after it
PRG10-03 is not confirms it.
corresponding to
an actual line.
• LAN cable Please reconfirm the
defective. CTI server, wiring, and
• Connected HUB the connection.
broken. Please inquire of the
• The CTI server manufacturer when the
doesn't start problem occurs after it
normally. confirms it.
• LAN cable Please confirm ACD
defective. MIS client PC and
• Connected HUB connected part.
broken. Please inquire of the
• The CTI server manufacturer when the
doesn't start problem occurs after it
normally. confirms it.
Issue 1.0
Alarm
Recovery
Status
The error is ERR
recovered
REC
when
reconnecting
or exchanging
it.
When the ERR
commercial
REC
power is
restored, the
error is
recovered.
The error is ERR
recovered
REC
once the
battery is
replaced.
When the ERR
connection
REC
returns
normally, the
error is
recover.
When the ERR
connection
REC
returns
normally, the
error is
recover.
When the ERR
connection
REC
returns
normally, the
error is
recover.
2 - 707