Dt700 Server Information Setup - NEC Univerge SV8100 Programming Manual

Issue 1.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-46 : DT700 Server Information Setup to setup the information of
SIP Multiline (DT700 series) Server.
Input Data
Item
No.
2 - 58

10-46 : DT700 Server Information Setup

Item
01 Register Mode
0 = Normal mode:
When the phone boots up it
will report the ext. assigned
in the phone or choose the
next available extension in
the system. No password
is required.
1= Auto:
If set to Auto then the SIP
user name and password
must be entered into the
actual IP phone. These
settings must match 84-22/
15-05-27, or the phone will
not come on-line.
2 = Manual:
When the phone boots up it
will prompt user to enter a
user id and password
before logging in. It checks
this user id/password
against 84-22/15-05-27. If
there is no match, the
phone will not come on-
line.
04 Server Name
Assign the Server name to
be used in the SIP URL.
Input Data
0 = Normal
1 = Auto
2 = Manual
Up to 32 characters
Program 10 : System Configuration Setup
UNIVERGE SV8100
Related
Default
Program
0
sipphd