NEC Univerge SV8100 Programming Manual page 414

Issue 1.0
Input Data
Item
No.
Feature Cross Reference
2 - 374
When entering names in the procedures below, refer to this chart. Names can
Use this keypad
digit . . .
#
Conf
Hold
01 All Call Paging Zone Name
Assign a name to each All Call Internal Paging zone.
The name shows on the display of the telephone
making the announcement.
02
Page Announcement Duration
This timer sets the maximum length of Page
announcements.
(Affects External Paging only)
04
Privacy Release Time
Once the user initiates a Meet-Me Conference or
Voice Call Conference, the system waits this time for
the Paged party to join the call.
Conditions
None
Paging, External
Paging, Internal
Key for Entering Names (Continued)
have up to 12 digits.
When you want to. . .
Enter characters:
+ , - . / :
£
# = Accepts an entry (only required if two letters on the same key
are needed - ex: TOM). Pressing
programming mode, use the right arrow soft key instead to accept
and/or add a space.)
Clear the character entry one character at a time.
Clear all the entries from the point of the flashing cursor and to the
right.
Item
UNIVERGE SV8100
B E σ S ∞
; < = > ?
# again = Space. (In system
Input Data Default
Up to 12 Group
All
Characters
0~64800 1200
(sec)
0~64800 90
(sec)
Program 31 : Paging Setup
¢
Related
Program
11-12-19
31-02-02