Show Ldap-Server Groups - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ldap-server groups

To display the Lightweight Directory Access Protocol (LDAP) server group configuration, use the show
ldap-server groups command.
show ldap-server groups
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples This example shows how to display the LDAP server group configuration:
switch# show ldap-server groups
total number of groups: 1
following LDAP server groups are configured:
Related Commands
Command
aaa group server ldap
feature ldap
group LDAPgroup1:
Use-vrf: default
Mode: UnSecure
Authentication: Search and Bind
Bind and Search : append with basedn (cn=$userid)
Authentication: Do bind instead of compare
Bind and Search : compare passwd attribute userPassword
Authentication Mech: Default(PLAIN)
Search map:
Modification
This command was introduced.
Description
Creates an LDAP server group and enters the LDAP
server group configuration mode for that group.
Enables LDAP.
Cisco Nexus 7000 Series Security Command Reference
show ldap-server groups
833