How To Use The Cli To Configure Features; Configuring The Command History; Changing The Command History Buffer Size; Recalling Commands - Cisco Catalyst 3650 Series Configuration Manual

How to Use the CLI to Configure Features

notification to registered applications whenever the configuration changes. You can choose to have the
notifications sent to the syslog.
Only CLI or HTTP changes are logged.
Note
How to Use the CLI to Configure Features

Configuring the Command History

The software provides a history or record of commands that you have entered. The command history feature
is particularly useful for recalling long or complex commands or entries, including access lists. You can
customize this feature to suit your needs.

Changing the Command History Buffer Size

By default, the switch records ten command lines in its history buffer. You can alter this number for a current
terminal session or for all sessions on a particular line. This procedure is optional.
SUMMARY STEPS
1. terminal history [size number-of-lines]
DETAILED STEPS
Command or Action
Step 1
terminal history [size number-of-lines]
Example:
Switch# terminal history size 200

Recalling Commands

To recall commands from the history buffer, perform one of the actions listed in this table. These actions are
optional.
The arrow keys function only on ANSI-compatible terminals such as VT100s.
Note
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
6
Purpose
Changes the number of command lines that the switch records during
the current terminal session in privileged EXEC mode. You can
configure the size from 0 to 256.
Using the Command-Line Interface
OL-32353-01