Changing The Wallpaper Image; Running A Slide Show From A Flash Drive; Setting Up Scan Center; Using Shortcut Center - Lexmark MX822 User Manual

Setting up and using the home screen applications
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud‑based notifications.
2
Apply the changes.

Changing the wallpaper image

1
From the home screen, touch Change Wallpaper.
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow.
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the flash drive again to view the images.

Setting up Scan Center

1
From the home screen, touch Scan Center.
2
Select and create a destination, and then configure the settings.
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.

Using Shortcut Center

1
From the home screen, touch Shortcut Center, and then select a printer function.
2
Touch Create Shortcut, and then configure the settings.
3
Touch Save, and then type a unique shortcut name.
4
Apply the changes.
20