Table of Contents
Advertisement
7462
After image
Leading edge
Trailing edge
The ghost appears on the media which, may be the image from the previous page or part of the page
currently printing.
Step
1
Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2
Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
3
Perform a print test.
Does the problem remain?
2-166
Service Manual
Check
CAUTION: : Allow
the fuser unit
assembly to cool
down.
Yes
No
Go to step 2.
Problem solved.
Replace the
Go to step 4.
fuser unit
assembly.
Go to
"Fuser
unit assembly
removal" on
page
4-15.
Contact next
Problem solved.
highest level of
tech support.
Previous
Next
Go Back
Advertisement
Table of Contents
