. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
Installing Hardware Options
Removing an Expansion Slot Cover
To install a PCI or an ISA expansion board, complete the following steps:
1. Locate the correct vacant slot in the expansion board.
2. Remove the screw from the expansion slot cover, then remove the
expansion slot cover.
Figure 3-4.
Installing an Expansion Slot Cover
To install an expansion slot cover, follow these steps:
1. Slide the expansion slot cover into place over the slot opening.
2. Install the screw at the side of the expansion slot to secure the
slot cover.
Removing the screw and expansion slot cover
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM