Sw1 - System Identification Switch Settings; Sw2 - System Configuration Switch Settings - Compaq PROLIANT ML370 Maintenance And Service Manual

SW1 – System Identification Switch Settings
The processor configuration switchbank (SW1) is an eight-position switch that is used for
processor configuration. Figure 4-3 shows the position of the SW1 switchbank on the system
board. Positions are reserved.
SW2 – System Configuration Switch Settings
The system configuration switchbank (SW2) is a six-position switch that is used for system
configuration. Figure 4-3 shows the position of SW2 on the system board and Table 4-4 defines
the function and shows the default switch settings for SW2.
Switch Position
1
2
3
4
5
6
Note: On activates the function.
CAUTION: Do not adjust the settings of the system identification switch.
System Configuration Switch Settings (SW2)
Function
Embedded video disable
Configuration lock
Rack mount
Diskette drive override
Password disable
Maintenance
Connectors, Switches, and LED Indicators 4-5
Table 4-4
Tower Default
Off
Off
Off
Off
Off
Off
Rack Default
Off
Off
On
Off
Off
Off