System Board Switches And Security Override Jumper; System Maintenance Switch (Sw2) - Compaq DL360 - ProLiant - Photon Maintenance And Service Manual

System Board Switches and Security Override Jumper

This section indicates and describes the functions of the switches and security override
jumper on the server system board for configuration and support purposes.
The Compaq ProLiant DL360 Generation 2 server has three switch banks (SW2, SW3 and
SW4) and an Integrated Lights-Out (iLO) security override jumper. Figure 5-4 and Table 5-4
identify the switches.
Figure 5-4: System board switches
Table 5-4: System Board Switches
Item


 
 

System Maintenance Switch (SW2)

Switch settings are pre-configured for shipping. All settings are reserved. Do not change
these settings unless directed.
IMPORTANT: All switches are defaulted to OFF
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 10:24 AM
Connectors, Switches, Security Override Jumper and Status LED Indicators
1 2 3
Description
Maintenance switch (SW2)
Chassis ID switch (SW3)
Miscellaneous support switch (SW4)
CAUTION: Do not change switch settings because incorrectly set switches may result in
damage to the server.
5-5