Engine Assembly
Engine Installation (cont'd)
5. Install the transmission lower front mount and
transmission lower rear mount on the front
subframe.
6. Install the rear mount on the front subframe.
5-14
10 x 1.25 mm
38 N·m (3.9 kgf·m,
28 lbf·ft)
10 x 1.25 mm
42 N·m (4.3 kgf·m,
31 lbf·ft)
7. Lower the hoist.
8. Tighten the front mount bracket support nut.
12 x 1.25 mm
54 N·m (5.5 kgf·m,
40 lbf·ft)
9. Install the side engine mount bracket, then tighten
the mounting bolts in the numbered sequence
shown.
12 x 1.25 mm
54 N·m (5.5 kgf·m,
40 lbf·ft)
10. Remove the chain hoist from the engine.
10 x 1.25 mm
44 N·m (4.5 kgf·m,
33 lbf·ft)