Engine Assembly
Engine Installation (cont'd)
43. Install the cruise control actuator cable, then adjust
it (see page 4-52).
44. Install the throttle cable, then adjust it (see page 11-
242).
45. Install the battery base.
46. Install the ground cable (A), relay box bracket (B)
and attach the harness clamp (C).
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
C
5-20
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
B
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
A
47. Connect the engine wire harness connectors on the
left side of the engine compartment.
48. Install the intake air duct (A), then install the
vacuum hose(s) (B) and breather pipe (C).
1999-2001 models:
D
C
2002-2004 models:
A
49. Install the EVAP canister hose (D) (1999-2001
models) or vacuum hose (D) (2002-2004 models).
A
B
B
C
D