20. Install the engine mount bracket.
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
21. Install the timing belt guide plate as shown.
22. Install the lower cover (A), front upper cover (B)
and rear upper cover (C).
C
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
23. Install the crankshaft pulley (see page 6-18).
24. Rotate the crankshaft pulley about five or six turns
clockwise so the timing belt positions on the
pulleys.
25. Turn the crankshaft pulley so its white mark (A)
lines up with the pointer (B).
A
B
A
B
(cont'd)
6-27