Honda 2004 Odyssey Service Manual page 195

Cylinder Head
Timing Belt Installation (cont'd)
26. Check the camshaft pulley marks.
• If the camshaft pulley marks are at TDC, go to
step 27.
• If the camshaft pulley marks are not at TDC,
remove the timing belt and repeat steps 2
through 26.
FRONT CAMSHAFT PULLEY:
REAR CAMSHAFT PULLEY:
27. Install the dipstick and tube (A) with a new O-ring
(B).
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
B
6-28
A
28. Install and adjust the power steering (P/S) pump
belt (see page 17-12).
29. Install the alternator-compressor belt (see page 4-
26).
30. Install the side engine mount bracket, then tighten
the mounting bolts in the numbered sequence
shown.
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
12 x 1.25 mm
54 N·m (5.5 kgf·m, 40 lbf·ft)
31. Install the splash sield.
32. Install the front tires/wheels.