Honda 2004 Odyssey Service Manual page 206

Rocker Arm and Shaft Disassembly/Reassembly
NOTE:
• Identify parts as they are removed so they can be reinstalled in their original locations.
• Inspect the rocker shafts and rocker arms (see page 6-41).
• Rocker arms must be installed in the same positions if reused.
• When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will
keep the springs and rocker arms on the shaft.
• Bundle the rocker arms with rubber bands to keep them together as a set.
• Prior to reassembling, clean all the parts in solvent, dry them and apply new engine oil to any contact points.
1999-2001 models:
EXHAUST ROCKER
ARM B
INTAKE ROCKER SHAFT
B
A
SPRING
EXHAUST ROCKER SHAFT
Letter B is stamped
on rocker arm.
A B
Letter A is stamped
on rocker arm.
INTAKE ROCKER
ARM ASSEMBLY
EXHAUST ROCKER
ARM A
(cont'd)
6-39