7. Support the engine with a jack and wood block
under the oil pan.
8. Remove the side engine mount bracket.
9. Remove the dipstick and tube (A); discard the O-
ring (B).
A
B
10. Remove the crankshaft pulley (see page 6-18), and
the timing belt guide plate.
11. Remove the front upper cover (A), rear upper cover
(B) and lower cover (C).
B
C
12. Remove one of the battery clamp bolts from the
battery tray, and grind the end of it as shown.
A
(cont'd)
6-21