Profile Name; Radius Profile Settings - Colubris Networks CN3000 Administrator's Manual

Chapter 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Activating the public access interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 5
2. Click Add New Profile. The RADIUS profile page opens.
3. Configure the settings as required. Refer to the sections that follow for detailed
4. Click Save when you are done.

Profile name

Specify a name to identify the profile.
RADIUS profile Authentication port
Specify the port to use for authentication. By default, RADIUS servers use port 1812.
settings
Accounting port
Specify the port to use for accounting. By default, RADIUS servers use port 1813.
Retry interval
Controls the retry interval (in seconds) for access and accounting requests that time-
out. If no reply is received within this interval, the CN3000 switches between the primary
and secondary RADIUS servers (if defined). If a reply is received after the interval
expires, it is ignored.
This parameter applies to access and accounting requests generated by the following:
• administrator logins to the management tool
• customer logins via HTML
• MAC-based authentication of devices
• authentication of the CN3000
The maximum number of retries can be determined as follows:
• HTML-based logins: The number of retries is calculated by taking the setting for
• MAC-based and CN3000 authentication: Number of retries is infinite.
• 802.1x authentication. Retries are controlled by the 802.1x client software.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 98 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
configuration information on each parameter.
HTML-based logins Authentication Timeout parameter and dividing it by the value of
this parameter. The default settings result in 4 retries (40 / 10).