Smtp Redirection - Colubris Networks CN3000 Administrator's Manual

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
When a customer session is terminated based on a quota, a new non-standard
termination cause is used. The value for this termination cause is 0x8744. You can
customize this by modifying the value of "radius-quota-exceeded-cause" in the
"ACCESS-CONTROLLER" section of the configuration file. See
instructions on how to do this.
The text value of for the termination cause is defined in the message.txt file under the
token "stat-quota-exceeded". The default value for this token is "Logged out. (Quota
Exceeded.)". This value can be displayed with the ASP function
GetAuthenticationErrorMessage(). See page
Displaying quota information
A series of ASP functions are available that enable you to display quota information on
the session page. For details, see
SMTP The CN3000 is able to provide SMTP email service on a per-customer basis. This
enables customers to send e-mail while on the road without the restrictions imposed by
redirection
most ISPs regarding the source address of outgoing mail. It works by intercepting the
call to a customer's e-mail server and redirecting it to an SMTP server that you
configure.
Important: For mail redirection to work, the customer's email server name must be
publicly known. If the e-mail server name cannot be resolved, mail redirection will fail.
Important: If an access list definition is active in the CN3000 profile that enables
unauthenticated customers to access their SMTP servers, the SMTP redirect feature
will not work for these customers.
Colubris-AVPair value string
smtp-redirect= address [: port ][, username , password ]
Where:
Example
smtp-redirect=smtp.mycompany.com
smtp-redirect=smtp.mycompany.com:8025
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 170 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Parameter Description
Specify the IP address or domain name of the e-mail server which
address
will be used to send outgoing redirected mail.
Specify the port on the e-mail server to relay to. Range: 1 to 65535.
port
Default: 25
Specify the username required to log on to the SMTP server.
username
Maximum 32 characters. Only used if the Support authentication
on SMTP proxy server option is enabled on the Security >
Authentication > Advanced page. Works with SMTP servers that
support plain or CRAM-MD5 authentication.
Specify the password required to log on to the SMTP server.
password
Maximum 32 characters. Only used if the Support authentication
on SMTP proxy server option is enabled on the Security >
Authentication > Advanced page. Works with SMTP servers that
support plain or CRAM-MD5 authentication.
129 for details.
"Session quotas" on page
Chapter 7 for
133.