Equipment Setup; Topology - Colubris Networks CN3000 Administrator's Manual

Chapter 17 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Experimenting with NOC authentication - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 17

Equipment setup

This section illustrates the hardware setup that was used to create the sample
configuration described in this chapter. If you duplicate this setup, you will not have to
change any of the IP addresses supplied in the example.

Topology

This example uses the same equipment setup presented in
follow the instructions in
For your reference the topology is:
Or you might have used this setup. Both are functionally identical.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 399 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Chapter 14
Client station
LAN port
192.168.1.1
192.168.1.2
x-over cable
CN3000
Client station
192.168.1.2
to install this sample and get it working.
CN3000
Server 1
Internet port
192.168.2.1
192.168.2.99
hub
Server 1
192.168.2.99
Internet port
192.168.2.1
hub
Chapter 14. You should
Server 2
192.168.2.100
Server 2
192.168.2.100