Step 9: Install And Configure The Cn3000; Assign A Static Address; Configure Radius Settings - Colubris Networks CN3000 Administrator's Manual

Chapter 16 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Microsoft RADIUS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 16

Step 9: Install and configure the CN3000

Assign a static 1. On the Network menu, click Ports.
2. Click Internet port in the table.
address
3. Select Static and then click Configure.
4. Make the following settings:
Configure The CN3000 must be configured to communicate with the RADIUS server. For a
detailed explanation of configuration issues, see
RADIUS settings
customer settings" on page
1. On the Security menu, click RADIUS.
2. Click RADIUS Profile 1. The RADIUS settings page opens.
3. Configure the following parameters:
4. Click Save.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 391 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• IP address: Assign an address. For this example, use the address: 192.168.2.1
• Address mask: Assign an appropriate mask. For this example, use the mask:
255.255.255.0.
• Default gateway: Leave blank. In a real setup this would be set to the address of
the router providing access to the Internet.
• In a real setup you would also need to define DNS settings.
143.
• Primary server address: Specify the address of Server 1. For this example, use
the address: 192.168.2.99
• Primary server secret: Specify the secret you defined on when configuring Steel-
Belted Radius. For this example, use the secret: secret
Chapter 7: "Customizing CN3000 and