Colubris Networks CN3000 Administrator's Manual page 86

Chapter 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Scenarios - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 4
4. Click Force authentication. The light should turn green, indicating that the CN3000
5. Click Save.
Define GRE tunnels
Network > GRE
Define three GRE tunnels for each WISP. Name the tunnels for the type of traffic that
they will carry and configure them as follows:
• WISP1_HTML
• WISP1_WPA
• WISP1_8021x
• WISP2_HTML
• WISP2_WPA
• WISP2_8021x
Configure WLAN profiles
Wireless > Wi-Fi > WLAN profiles
Define three WLAN profiles for each WISP. Name the profiles for the type of traffic that
they will carry and configure them as follows.
WISP1_HTML and WISP2_HTML
1. Use the default settings for all parameters.
2. In the Traffic Tunneling (GRE) box, do the following:
WISP1_WPA and WISP2_WPA
1. Enable Wireless protection and select WPA.
2. Set Key source protection to RADIUS.
3. Set RADIUS profile to RADIUS profile 1.
4. In the Traffic Tunneling (GRE) box, do the following:
WISP1_8021x and WISP1_8021x
1. Enable Wireless protection and select 802.1x.
2. Select RADIUS profile 1.
3. Enable the WEP encryption option.
4. In the Traffic Tunneling (GRE) box, do the following:
5. Click Save.
Restart the CN3000.
Once one or more GRE tunnels are enabled, the CN3000 must be restarted any time
changes are made to any parameter on any page in the management tool.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 86 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
has been successfully authenticated.
(page 240 and 241)
• Map Authenticated 802.1x user traffic to WISP1_8021x or WISP2_802.1x
• Map Unauthenticated user traffic to WISP1_HTML. or WISP2_HTML.
• Map Authenticated 802.1x user traffic to WISP1_WPA or WISP2_WPA
• Map Unauthenticated user traffic to WISP1_HTML. or WISP2_HTML.
• Map Authenticated 802.1x user traffic to WISP1_8021x or WISP2_8021x.
• Map Unauthenticated user traffic to WISP1_HTML. or WISP2_HTML.
(page 218 + 219)