Scenario 2C: Supporting 802.1X/Wpa Customers; How It Works; Configuration Roadmap - Colubris Networks CN3000 Administrator's Manual

Chapter 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Scenarios - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 4

Scenario 2c: Supporting 802.1x/WPA customers

This scenario adds support for 802.1x/WPA customers to Scenario 2b.
This installation illustrates how to use virtual access points to support different types of
wireless customers.

How it works

In this scenario, three wireless profiles are used to create three separate wireless
networks. Each network supports a different type of customer: 802.1x, WPA, or
customers using a web browser to log in.
Configuration
Configure the wireless profiles
roadmap
Wireless > Wi-Fi > WLAN profiles
Add the following two profiles:
8021x
1. Enable Wireless protection and select 802.1x.
2. Select RADIUS profile 1.
3. Enable the WEP encryption option.
WPA
1. Enable Wireless protection and select WPA.
2. Set Key source protection to RADIUS.
3. Set RADIUS profile to RADIUS profile 1.
Wireless > Wi-Fi
Change the WLAN name to Standard.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 80 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Protected network
SSID=WPA
SSID=Standard
(page 214)
SSID=8021x
(page 218 + 219)