Colubris Networks CN3000 Administrator's Manual page 344

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15
9. Click Done.
10. Click the Returned list attributes tab.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 344 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
You can now specify the attributes that will be returned after a customer is
successfully authenticated. This enables you to define a number of important
operating characteristics, including:
• The access list that is in use.
• Support for SMTP mail redirection.
• Settings for session timeouts and accounting updates.
For this example, you should create the following four entries:
A
Idle-Timeout 30
This causes the CN3000 to log the customer out if the session is idle for
more than 30 seconds
B
Session-Timeout
This causes the CN3000 to log the customer out if the session is active
for more than 360 seconds.
C
Colubris-AVPair
This provides access to the fictional SMTP server on 192.168.2.100.
Used for the CUSTOMERS-SMTP-REDIRECT
D
Colubris-AVPair
This access list was defined in the HOTSPOTS profile. It is activated here
to provide access to the web server on 192.168.2.100.
(Refer to "Creating a profile for the CN3000 on the RADIUS server" on page 150
a complete list of all supported attributes.)
360
smtp-redirect=192.168.2.100
use-access-list=cust
profile only.
for