Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
Group name
Note: This feature only applies when location-aware authentication is being used
(Security > Authentication > Advanced).
This attribute is set to the group name of the access point the customer is associated
with in the Access request packet.
Colubris-AVPair value string
group= value
Where:
NAT port range
Note: This feature only applies when Limit NAT port range is enabled on the Network
> Internet port.
The CN3000 returns the port range that the customer's traffic is being sent/received on.
This applies to TCP and UDP traffic only.
Important: The CN3000 reserves 50 TCP and 50 UDP ports for each user starting at
port 5000. Therefore, if you enable this feature you should not assign static NAT
mappings in the range 5000 to 10000.
Colubris-AVPair value string
nat-port-range= startport - endport
Where:
SSID
Note: This feature only applies when location-aware authentication is being used
(Security > Authentication > Advanced).
This attribute is set to the SSID of the access point the customer is associated with in
the Access request packet.
Colubris-AVPair value string
ssid= value
Where:
Access list
An access list is a set of rules that govern how the CN3000 controls customer access to
protected network resources (those attached to the CN3000's Internet port). Access
lists are defined in the profile for the CN3000 (see page 153) and are activated in the
customer profiles as needed.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 168 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Parameter
Description
Name of the access point group the customer is associated with.
value
Parameter
Description
Starting port number for the customer's traffic.
startport
Ending port number for the customer's traffic.
endport
Parameter
Description
SSID of the access point the customer is associated with.
value