Step 6: Install And Configure The Cn3000; Assign A Static Address; Configure Radius Settings - Colubris Networks CN3000 Administrator's Manual

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15

Step 6: Install and configure the CN3000

Assign a static 1. On the Network menu, click Ports.
2. Click Internet port in the table.
address
3. Select Static and then click Configure.
4. Make the following settings:
Configure
The CN3000 must be configured to communicate with the Steel-Belted Radius server.
For a detailed explanation of configuration issues, see
RADIUS settings
and customer settings" on page
1. On the Security menu, click RADIUS.
2. Click RADIUS Profile 1. The RADIUS settings page opens.
3. Configure the following parameters:
4. Click Save.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 349 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• IP address: Assign an address. For this example, use the address: 192.168.2.1
• Address mask: Assign an appropriate mask. For this example, use the mask:
255.255.255.0.
• Default gateway: Leave blank. In a real setup this would be set to the address of
the router providing access to the Internet.
• Primary server address: Specify the address of Server 1. For this example, use
the address: 192.168.2.99
• Primary server secret: Specify the secret you defined on when configuring Steel-
Belted Radius. For this example, use the secret: secret
Chapter
143.
7: "Customizing CN3000