Colubris Networks CN3000 Administrator's Manual page 148

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 148 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ID Cause
4 Idle Timeout
5 Session Timeout
6 Admin Reset
7 Admin Reboot
8 Port Error
9 NAS Error
10 NAS Request
11 NAS Reboot
12 Port Unneeded
13 Port Preempted
14 Port Suspended
15 Service
Unavailable
16 Callback
17 User Error
18 Host Request
0x8744 Termination
(34628
decimal)
Notes
Supported. Customer exceeded the idle timeout
value defined for the session.
Supported. Customer exceeded maximum time
defined for the session.
Supported. Customer session was terminated by
the CN3000 administrator via SNMP or the
management tool.
Not Supported. (not applicable)
Supported. If two customers are detected using
the same IP address, both are logged out with
this error. Another cause is if an error is
encountered in an access list definition. For
example, an invalid host was specified.
Not Supported. (not applicable)
Not Supported. (not applicable)
Supported. Customer was logged out because
the CN3000 was restarted.
Not Supported. (not applicable)
Supported. When a customer switches access
point or SSID with incompatible configurations
(authentication type), they are logged out with
this code.
Not Supported. (not applicable)
Not Supported. (not applicable)
Not Supported. (not applicable)
Supported. An 801.1x client initiated a second
authentication request for a customer, and this
request was refused.
Not Supported. (not applicable)
Colubris-specific termination cause. See page
169 for details.