Colubris Networks CN3000 Administrator's Manual page 122

Chapter 6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing the public access interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 6
Placeholders
The following placeholders can be added to the login-url string.
Important: The maximum length of the remote login page URL is 512 characters.
If this is exceeded (when using placeholders for example), the URL is truncated. It
is therefore recommended that important placeholders be specified first.
Important: To use the remote login page, you must provide a complete set of
internal pages (except for login.html), which includes:
transport-page= URL_of_page
session-page= URL_of_page
fail-page= URL_of_page
logo= URL_of_gif_file
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 122 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Placeholder Description
Returns the IP address of the customer's computer.
%c
Returns the URL on the CN3000 where customer login
%l
information should be posted for authentication.
Returns the NAS ID assigned to the CN3000. By default, this
%n
is the unit's serial number. Not supported in local mode.
Returns the RADIUS login name assigned to the CN3000. By
%s
default, this is the unit's serial number. Not supported in local
mode.
Returns the original URL requested by the customer.
%o
Returns the domain name assigned to the CN3000's Internet
%i
port.
Returns the port number on the CN3000 where customer
%p
login information should be posted to for authentication.
Returns the IP address of the CN3000's interface that is
%a
sending the authentication request.
When the location-aware feature is enabled, returns the
%E
ESSID of the wireless access point the customer is
associated with.
When the location-aware feature is enabled, returns the
%P
wireless mode ("ieee802.11b") the customer is using to
communicate with the access point.
When the location-aware feature is enabled, returns the group
%G
name of the wireless access point the customer is associated
with.
When the location-aware feature is enabled, returns the
%C
Called-station-id content for the wireless access point the
customer is associated with.
Returns the string sent by the RADIUS server when an
%r
authentication request fails. The RADIUS server must be
configured to support this feature. The information contained
in the returned string depends on the configuration of the
RADIUS server.
Returns the MAC address of the wireless/wired client station
%m
that is being authenticated.