Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
Local config attribute
Open the Security > Local config page and click an attribute in the list, or click
Add New Attribute.
Attribute
These attributes enable you to customize the behavior of the public access interface
and customer sessions.
Access lists
Access lists enable you to create public areas on your network that all customers can
browse, and protected areas that are restricted to specific customer accounts or groups.
Each access list is a set of rules that governs how the CN3000 controls access to
network resources. You can create multiple access lists, each with multiple rules to
manage the traffic on your public access network.
Syntax
access-list=
listname [,OPTIONAL], action , protocol , address , port [, account [, interval ]]
use-access-list= uselistname
Where:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 270 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Parameter
Description
Specify a name (up to 32 characters long) to identify the access
listname
list this rule applies to. If a list with this name does not exist, a
new list is created. If a list with this name exists, the rule is
added to it.
Specify the name of an existing access list. This list is activated
uselistname
for the current profile. Lists are checked in the order they are
activated.