Standard Mibs; Management Consoles; Mib Ii Support Details - Colubris Networks CN3000 Administrator's Manual

Chapter 9 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SNMP interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 9

Standard MIBs

The CN3000 supports the following MIBs:
• IEEE8021-PAE-MIB
• RADIUS-AUTH-CLIENT-MIB
• RADIUS-ACC-CLIENT-MIB
• RFC1213-MIB
• RIPv2-MIB
• 802.11b: See the Colubris Enterprise MIB (page 190)
• Colubris Enterprise MIB
Management To manage the CN3000, third-party SNMP management consoles must support the
SNMPV2C protocol.
consoles
MIB II support The CN3000 provides complete read support of MIB II objects 1.10. The following table
lists all MIB II objects defined as read/write and indicates the objects that can be "set"
details
on the CN3000.
Set
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 188 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Full read support. Write support as defined below.
Group OID
Y system sysContact
Y SysName
Y sysLocation
N interfaces ifAdminStatus
N At AtIfIndex
N atPhysAddress
N atNetAddress
N Ip ipForwarding
N ipDefaultTTL
N ipRouteDest
N ipRouteIfIndex
N iprouteMetric1
N iprouteMetric2
N iprouteMetric3
N iprouteMetric4
N ipRouteNextHop
N ipRouteType
Notes
Can be up(1) or down(2) .
Can be other(1), invalid(2),
direct(3), or indirect(4).