Step 1: Add Support For Colubris Networks Attributes - Colubris Networks CN3000 Administrator's Manual

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15

Step 1: Add support for Colubris Networks attributes

Note: If you do not want to modify the files yourself, modified versions are available in
the Colubris Backend archive which can be found on the Colubris Networks web site or
on the CD.
Do the following on server 1:
1. Create an file named colubris.dct in the folder: c:\radius\service
2. Edit the file so that it contains the following entries.
3. Edit c:\radius\service\dictiona.dcm. Add the following line to the end of this file,
4. Edit c:\radius\service\vendor.ini. Add the following lines to the end of the file.
5. Restart Steel-Belted Radius. For example, start a command line session and then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 336 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
@radius.dct
ATTRIBUTE Colubris-AVPAIR 26 [vid=8744 type1=0 len1=+2 data=string] RO
For more information on the format of this file, see c:\radius\service\readme.dct.
just after the last line beginning with an '@'.
@colubris.dct
vendor-product
dictionary
ignore-ports
port-number-usage
help-id
issue the commands:
net stop "Steel-Belted RADIUS"
net start "Steel-Belted RADIUS"
= Colubris CN3000
= Colubris
= no
= per-port-type
= 0