Defining A Customer Profile - Colubris Networks CN3000 Administrator's Manual

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15
Defining a The CN3000 supports an SMTP redirection feature which enables customers to send
outgoing mail without being directly connected to their SMTP server.
Customer profile
To use this feature, the customer profiles need to be split into two types: those with
SMTP redirection and those without it. To this end, this example will create two profiles:
CUSTOMERS-SMTP-REDIRECT and CUSTOMERS-NO-SMTP.
Note: This example assumes the SMTP server is located on Server 2, although no such
software is actually installed.
To define the customer profiles, do the following:
1. Click Profiles.
2. Click Add. The Add New Profile dialog box opens.
3. Specify CUSTOMERS-NO-SMTP as the name and click OK.
4. Click Add.
5. Specify CUSTOMERS-SMTP-REDIRECT as the name and click OK.
6. Click the Check list attributes tab.
7. Click the Ins button. The Add New Attribute dialog box opens.
8. Select Service-Type and set it to the value Framed. Click Add.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 343 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Once all entries are complete, the Return list attributes tab should look like this:
• Click Save.