Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
Wireless link configuration
Open the Wireless > Links page, then click a link in the table.
Settings
When the link is enabled, it is ready to establish a connection with the remote access
point. For the link to be established the remote access point must also have a properly
defined link which is enabled.
Link name
Identifies the link.
Speed
Sets the speed the link will operate at. For load balancing you may want to limit the
speed of a link when connecting to multiple destinations.
None
Security
No encryption.
WEP
Specify the encryption key the CN3000 will use to encrypt/decrypt all data it sends and
receives. The key is 128 bits long and must be specified as 26 hexadecimal digits.
Addressing
Remote MAC address
MAC address of the remote access point.
Local MAC address
MAC address of the local access point.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 224 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -