Configuration Roadmap - Colubris Networks CN3000 Administrator's Manual

Chapter 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Scenarios - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 4
Topology 2
In this version, the NOC is located on local LAN B. Instead of being directly connected
to the Internet, the CN3000 is also connected to local LAN B.
The firewall and NAT are also enabled to protect the public access network.
Configuration On the RADIUS server
roadmap
Define RADIUS accounts for the CN3000 and all customers that will use the public
access network.
Install the CN3000
1. Install the CN3000 as described in
2. Connect the Internet port to the broadband modem and then restart it.
3. Start the management tool.
Configure the wireless network
Wireless > Neighborhood
Open this page to see if there are other access points operating in your area and make
a note of their operating frequencies.
Wireless > Wi-Fi
1. Set the Operating frequency to a channel that does not overlap an existing access
2. Use the default settings for all other parameters.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 76 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SMTP
server
Web/FTP
server
RADIUS
server
LAN A LAN B
(page 214)
point. See "Configuring overlapping wireless cells" on page 31
Network Operating Center
Chapter 3.
(page 225)
Management
station
VPN server
Router /
Firewall
for details.