Colubris Networks CN3000 Administrator's Manual page 77

Table of Contents

Advertisement

Chapter 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Scenarios - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 4
Configure the Internet port
Network > Ports > Internet port
1. Select the addressing option supported by your ISP (Topology 1) or LAN B
2. Define all settings as required.
Enable the firewall
Security > Firewall
Select the Preset firewall with Security level set to High.
Create a RADIUS profile
Security > RADIUS
1. Click Add New Profile.
2. In the Profile name box, assign RADIUS Profile 1 to the new profile.
3. In the Settings box, use the defaults except for Authentication method which must
4. In the Primary RADIUS server box, specify the address of the RADIUS server and
Connect to the RADIUS server
Security > Authentication
1. Enable the CN3000 RADIUS authentication option.
2. Select the RADIUS profile you just defined.
3. Specify the username and password the CN3000 will use to login to the RADIUS
4. Click Force authentication. The light should turn green, indicating that the CN3000
5. In the HTML-based user logins box, enable RADIUS authentication and disable
6. In the RADIUS accounting box, enable accounting support if you require it.
7. Click Save.
Test the public access interface
To test your installation, use a wireless client station to log onto the public access
interface. (For this to work, the CN3000 must be configured as the client's default
gateway. This is done by default if the wireless client is using DHCP.)
1. Start the client station's web browser and enter the IP address (or domain name) of
2. The CN3000 should intercept the URL and display the Login page opens. Specify a
3. The CN3000 session page will open.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 77 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
(Topology 2) and click Configure.
(page 253)
(page
250
match the method supported by the RADIUS server.
the secret the CN3000 will use to login.
server.
has been successfully authenticated.
Local authenticaiton.
a web site on the Internet.
valid customer name and password.
(page 228)
and 251)
(page 245)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents