Default Wireless Profile; Access Point - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

Default wireless profile

Open the Wireless > Wi-Fi page.

Access point

Enable this option to activate the wireless access point. When this option is disabled,
wireless client stations will not be able to connect.
WLAN name (SSID)
Specify a name to uniquely identify your wireless network. Each client computer that
wants to connect to the CN3000 must use this name. The name is case-sensitive.
Maximum number of wireless client stations
Specify the maximum number of wireless client stations that can be associated with this
SSID at the same time.
Important: Important: The total number of wireless client stations that can be
connected to the CN3000 at the same time across all WLAN profiles is 255.
Important: Important: Only 100 customers can be logged into the public access
interface at one time. Customers that are not logged in can still make use of the wireless
network to access public resources (i.e., those resources specified in the white list or
with an access list "accept").
Broadcast WLAN name (SSID)
When this option is enabled, the CN3000 will broadcast its wireless network name
(SSID) of this profile to all client stations. Most wireless adapter cards have a setting
that enables them to automatically discover access points that broadcast their names
and automatically connect to the one with the strongest signal.
If you disable this option, client stations will have to specify the network name you enter
for WLAN name when they connect.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 214 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -