Step 1: Configure The Cn3000 - Colubris Networks CN3000 Administrator's Manual

Chapter 17 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Experimenting with NOC authentication - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 17

Step 1: Configure the CN3000

In this step you will install an SSL certificate on the CN3000 and enable NOC
authentication. The certificate has already been created and can be found in the
backend folder.
Install an SSL certificate on the CN3000
1. Login to the management tool and go to Security > Certificates.
2. In the [SSL] Web Server Certificates box, click Browse.
3. Select the following folder on the CN3000 CD-ROM:
4. In the Password field, specify www.noc-cn3000.com.
5. Click Install.
6. The CN3000 will install the certificate. The CN3000 will now be reachable as
Enable NOC authentication
1. Click Security, then click Authentication.
2. Click the Advanced Settings button.
3. Enable the NOC authentication feature.
4. Add the IP address of the Server 1 (192.168.2.99) to the Allowed Addresses box.
5. Click Save.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 400 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
\backend\winhttpauth\www.noc-cn3000.com.pfx
www.noc-cn3000.com. (This is an alias to the IP address of the CN3000's Internet
port.)