Colubris Networks CN3000 Administrator's Manual page 315

Chapter 14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Backend software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 14
6. Configure the CN3000 box as follows:
7. In the HTML-based User Logins box, set RADIUS profile to RADIUS Profile 1.
8. Click Save. The CN3000 will attempt to connect to the Steel-Belted Radius server. If
9. Go to Wireless > WLAN profiles.
10. Click the Colubris Networks profile.
11. In the Wireless protection box:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 315 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• RADIUS profile: Set to RADIUS profile 1.
• RADIUS username: Set to hotspot.
• RADIUS password: Set to hotspot.
successful, the status light will change from red to green.
You can use the Statistics page on the Steel-Belted Radius Administrator to view
progress of the connection.
When you click the Save button in the management tool, the number of Accepts
should be incriminated. That means that all settings are properly configured on the
CN3000 and Steel-Belted Radius.
If the number of Rejects is incriminated instead, there may be a problem with a
badly set username and/or password. Check the log file in c:\radius\service. It is
named yyyymmdd.log, where yyyy is the year, mm is the month and dd the day.
For example, 20030822.log for August 22, 2003.
If the number of Silent Discards is incriminated, it probably means that either the IP
address of the CN3000 and/or the shared secret has not been properly configured
on the RAS client tab.
You can increase the amount of information in the log file by changing the following
values in the c:\radius\service\radius.ini file, and restarting Steel-Belted Radius:
[Configuration]
LogLevel
TraceLevel
Change both values from 0 to 2.
= 0
= 0