Colubris-Avpair Attribute - Colubris Networks CN3000 Administrator's Manual

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
• Acct-Input-Gigawords (32-bit unsigned integer): High 32-bit value of the number of
• Acct-Input-Octets (32-bit unsigned integer): Number of packets received by the
• Acct-Output-Octets (32-bit unsigned integer): Low 32-bit value of the number of
• Acct-Output-Gigawords (32-bit unsigned integer): High 32-bit value of the number of
• Acct-Output-Octets (32-bit unsigned integer): Number of packets sent by the
Accounting stop only
• Acct-Terminate-Cause (32-bit unsigned integer): Termination cause for the session
Accounting response
None.
Colubris-AVPair For each customer profile you can specify one or more instances of a Colubris-AVPair
attribute that will be sent when requesting authentication (RADIUS Request) or returned
attribute
upon successful authentication (RADIUS Accept). Possible values for all instance are
grouped into the following categories:
Access request
Access accept
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 167 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
octets/bytes received by the customer. Only present when Acct-Status-Type is
Interim-Update or Stop.
customer. Only present when Acct-Status-Type is Interim-Update or Stop.
octets/bytes sent by the customer. Only present when Acct-Status-Type is Interim-
Update or Stop.
octets/bytes sent by the customer. Only present when Acct-Status-Type is Interim-
Update or Stop. As defined in 2869.
customer. Only present when Acct-Status-Type is Interim-Update or Stop.
See RFC 2866 for possible values. Only present when Acct-Status-Type is Stop.
Feature Description
Group name Sends the group name of the wireless access point the
customer is associated with.
SSID Sends the SSID of the wireless access point the customer is
associated with.
Feature
Description
Access list Activates support for an access list
Colubris-Intercept Redirects customer traffic into a GRE tunnel.
One-to-one NAT Activates support for one-to-one NAT (See page
Quotas Enables upload and download limits to be set individually for
each customer.
SMTP redirection Activates support for the CN3000 e-mail redirection feature.
URLs for custom Enables you to customize the public access interface for a
HTML pages particular customer. See
VLAN support Sets VLAN ID for 802.1x/WPA customers connected to a
CN300/CN320.
46
Chapter 6 for details.
for details).