Internet Connection; Assign Ip Address Via; Link Settings - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

Internet connection

Open the Network > Ports > Internet port page.
Assign IP PPPoE client
Point-to-point protocol over Ethernet. The PPoE server will automatically assign an IP
address via
address to the CN3000. You need to supply a username and password so the CN3000
can log on.
DHCP client
Dynamic host configuration protocol. The DHCP server will automatically assign an
address to the CN3000, which functions as a DHCP client.
Static
This option enables you to manually assign an IP address to the CN3000's Internet port.

Link settings

The title bar shows the current status of the link.
Speed
• Auto: Lets the CN3000 automatically set port speed based on the type of equipment it
• 10: Forces the port to operate at 10 mbps.
Duplex
• Auto: Lets the CN3000 automatically set duplex mode based on the type of equipment
• Full: Forces the port to operate in full duplex mode.
• Half: Forces the port to operate in half duplex mode.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 228 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
is connected to.
it is connected to