Colubris Networks CN3000 Administrator's Manual page 156

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
Note: Spaces can be used instead of commas as separators.
Example
This topology shows wireless deployment for a fictitious university campus.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 156 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Specify one of the following:
address
• IP address or domain name (up to 107 characters in length)
• Subnet address. Include the network mask as follows:
address/subnet mask For example: 192.168.30.0/24
• Use the keyword all to match any address.
• Use the keyword none if the protocol does not take an address
range (ICMP for example).
Specify a specific port to check or a port range as follows:
port
• none - Used with ICMP (since it has no ports).
• all - Check all ports.
• 1-65535[:1-65535] - Specify a specific port or port range.
Specify the name of the customer account the CN3000 will send
account
billing information to for this rule. Account names must be unique and
can be up to 32 characters in length.
Specify time between interim accounting updates. If you do not
interval
enable this option, accounting information is only sent when a
customer connection is terminated. Range: 5-99999 seconds in 15
second increments.