Step 8: Test The Installation - Colubris Networks CN3000 Administrator's Manual

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15

Step 8: Test the installation

To test the installation, use the client station to log onto the public access interface. For
this to work, the CN3000 must be configured as the client's default gateway. If you set
up your equipment to match the setup of this example, this is automatic. If not, adjust
the configuration of the client accordingly.
1. Start the client station's web browser and enter the IP address (or domain name) of
2. The CN3000 should intercept the HTTP request and display the login page.
3. To login, specify customer1 as both the username and password. The CN3000
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 353 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Server 2 in the address bar.
Depending on the type of certificate that is installed on the CN3000 you may see a
security warning first.
session page should open.