Ipsec Policy List; Ipsec Security Policy Database - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

IPSec policy list

Open the Security > IPSec page.
IPSec security
The table on this page displays all IPSec security policies defined on the CN3000.This
includes policies used to secure the wireless network as well as create secure
policy database
connections to remote peers via the Internet port.
A security policy defines the criteria that must be met for a peer to establish an IPSec
security association (SA) with the CN3000. Depending on its settings, a policy may
allow one or more peers to establish an SA with the CN3000. Each time an SA is
established, a new entry is added to the IPSec security associations table. Click IPSec
on the Status menu to view this table.
Name
Name assigned to the security policy.
Port
Port assigned to the security policy.
Peer address
Address of the peer which can establish an SA using this policy.
Mode
Indicates the IPSec mode (tunnel or transport) supported by this policy.
Status
Indicates whether the policy has been enabled. An SA can only be established when a
policy is enabled.
Authentication
Indicates the method used to authenticate peers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 258 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -