Colubris Networks CN3000 Administrator's Manual page 166

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7
Access reject
• MSCHAP-Error (string): A MSCHAP specific error as defined by RFC 2433.
• Reply-Message (string): This string (as defined in RFC 2865) is recorded and passed
• EAP-Message (string): Only supported when authentication is EAP-MD5 or with
Access challenge
• EAP-Message (string): One or more occurrences of this attribute is supported inside
• State (string): As defined in RFC 2865.
Accounting request
Accounting information is generated by default. To disable accounting support, open the
Security > Authentication page.
Accounting start/stop/interim-update
• Acct-Session-Id (32-bit unsigned integer): Random value generated by the CN3000.
• NAS-Identifier (string): The NAS ID set on the Security > RADIUS page for the profile
• NAS-Ip-Address (32-bit unsigned integer): The IP address of the port the CN3000 is
• NAS-Port (32-bit unsigned integer): A virtual port number starting at 1. Assigned by
• NAS-Port-Type (32-bit unsigned integer): Always set to 19, which represents
• Calling-Station-Id (string): The MAC address of the customer's station in IEEE format.
• Called-Station-Id (string): The MAC address of the CN3000's LAN port or the CN300/
• Class (string): As defined in RFC 2865. Multiple instances are supported.
• User-Name (string): The username assigned to the customer or to a device when
• Framed-IP-Address (32-bit unsigned integer): IP Address of the customer's station.
• Acct-Status-Type (32-bit unsigned integer): Supported value are Start (1), Interim
• Acct-Event-Timestamp (32-bit unsigned integer): As defined in RFC 2869.
• Acct-Delay-Time (32-bit unsigned integer): As defined in RFC 2865.
• Acct-Authentic (32-bit unsigned integer): Always set to 1 which means RADIUS.
• Acct-Session-Time (32-bit unsigned integer): Number of seconds this session since
Accounting start only
• Acct-Input-Octets (32-bit unsigned integer): Low 32-bit value of the number of octets/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 166 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
as is to the GetRadiusReplyMessage() asp function. Only a single instance is
supported.
IEEE802dot1x. Note that the content will not be read as the RADIUS Access Reject is
overriding whatever indication contained inside this packet. As defined in RFC 2869.
the same packet. All occurrence are concatenate and transmitted to the
IEEE802dot1x client as is. As defined in RFC 2869.
being used.
using to communicate with the RADIUS server.
the CN3000.
WIRELESS_802_11.
For example: 00-02-03-5E-32-1A.
CN320's downstream port if location-aware authentication is enabled.
using MAC authentication.
Update (3), and Stop (2).
this session was authenticated. Only present when Acct-Status-Type is Interim-
Update or Stop.
bytes received by the customer. Only present when Acct-Status-Type is Interim-
Update or Stop.